Aluminum Sacrificial Anodes
FOR PIERS AND PILINGS

Aluminum galvanic anodes for piers and pilings from the Deepwater MPE foundry are cast in one of two premium aluminium alloys (Deep7 / MPE III), for optimal performance in any conditions. Anodes are manufactured in several "standard" sizes, shown below. In addition to these, Deepwater Gaus can cast anodes for for piers, jetties, or any other piling to the exact specifications required. Please contact us for advice on optimizing an anode to suit your specific requirements.

STANDARD PIER/PILING ANODE DIMENSIONS

Anode Type (round bar core) Gross Weight (kg) Net Weight (kg) L (mm) W1 (mm) W2 (mm) T (mm) Lc (mm) D (mm) A71.6T1 72.0 71.6 750 180 225 180 1050 12 A87.0T1 88.7 87.0 1850 120 160 140 2150 12 A97.0T1 98.0 97.0 800 200 250 200 1100 12 A119.0T1 122.0 119.0 1526 230 290 159 1826 14 A131.0T1 134.0 131.0 1100 190 255 200 1400 16 Anode Type (flat bar core) Gross Weight (kg) Net Weight (kg) L (mm) W1 (mm) W2 (mm) T (mm) Lc (mm) A71.6T2 73.2 71.6 750 180 225 180 1050 A87.0T2 89.0 87.0 1850 120 160 140 2150 A97.0T2 100.0 97.0 800 200 250 200 1100 A119.0T2 122.0 119.0 1526 230 290 159 1826 A131.0T2 140.0 131.0 1100 190 255 200 1400 CORE TYPES: T1 - Slender Anode With Round Bar Core T2- Slender Anode With Flat Bar Core Note: t - Thickness Of Core In Reference To Anode Weight or Request

ALUMINUM ALLOY CHEMICAL COMPOSITION

MPE III Iron (Fe) 0.07 max Iron (Fe) 0.10 max Silicon (Si) 0.10 max Silicon (Si) 0.10 max Copper (Cu) 0.003 max Copper (Cu) 0.006 max Zinc (Zn) 4.75 - 5.25 Zinc (Zn) 2.0 - 6.0 Indium (In) 0.015 - 0.025 Indium (In) 0.01 - 0.05 Titanium (Ti) 0.025 max Titanium (Ti) 0.025 max Others (each) 0.02 max Others (each) 0.02 max Aluminum (Al) remainder Aluminum (Al) remainder